Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3EG3 - PA66-GF15 - BASF

Material Data Center offers the following functions for Ultramid® A3EG3:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 70 / * cm³/10min ISO 1133
温度 275 / * °C -
荷重 5 / * kg -
ASTM数据
成形収縮率., 平行 0.0055 mm/mm ASTM D 955
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 6000 / 4500 MPa ISO 527
降伏応力 130 / 85 MPa ISO 527
破壊呼びひずみ 3 / 10 % ISO 527
曲げ弾性率, 23°C 5500 / 4000 MPa ISO 178
引張クリープ弾性率, 1000h * / 2500 MPa ISO 899-1
シャルピー衝撃強さ, +23°C 45 / 70 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 43 / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 8 / 11 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 7 / - kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 5.5 / 6.5 kJ/m² ISO 180/1A
Ball indentation hardness 200 / 150 MPa ISO 2039-1
ASTM数据
破壊応力 114 / - MPa ASTM D 638
破断伸び 3 / - % ASTM D 638
曲げ弾性率 5170 / - MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 59 / - J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 53 / - J/m ASTM D 256
温度 -40 °C -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 250 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 250 / * °C ISO 75-1/-2
線膨張係数, 平行 32 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 75 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
ASTM数据
DTUL @ 66 psi 250 °C ASTM D 648
DTUL @ 264 psi 250 °C ASTM D 648
溶融温度 260 °C ASTM D 3418
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 1MHz 3.5 / 5.5 - IEC 62631-2-1
誘電正接, 1MHz 140 / 1600 E-4 IEC 62631-2-1
体積抵抗率 1E13 / 1E10 Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E10 Ohm IEC 62631-3-2
耐トラッキング性 550 / - - IEC 60112
ASTM数据
体積抵抗率 1E13 / - Ohm*cm ASTM D 257
その他の特性.乾燥/調湿単位テスト基準
吸水率. 7 / * % Sim. to ISO 62
吸湿率 2.2 / * % Sim. to ISO 62
密度. 1230 / - kg/m³ ISO 1183
吸水率, 平衡 7 % ASTM D 570
密度 1240 kg/m³ ASTM D 792
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数. 145 / * cm³/g ISO 307, 1157, 1628
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット., ナチュラルカラー
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.